Hughes 9502 IP satellite terminal provides reliable connectivity over the
Inmarsat Broadband Global Area Network (BGAN) for
IP SCADA and machine-to-machine (M2M) applications. Hughes terminal delivers affordable, global,
end-to-end IP data connectivity enabling applications in industry sectors such as environmental monitoring, SmartGrid, pipeline monitoring, compressor monitoring, well site automation, video surveillance, and out-of-band management to primary site communications.
The exceptional low power consumption (<1 W idle) of the
Hughes 9502 makes it possible to provide end-to-end IP connectivity to sites that are off the grid. This breakthrough provides
end-to-end IP connectivity to power-challenged locations that rely upon solar battery arrays involving sensitive power budgets.
Features of
Hughes 9502 BGAN M2M Terminal are:-
- Inherits 9201-M2M software features and stability
- IP watchdog ensures network connectivity--no manual intervention
- Auto-On/Auto-Context-Activation
- Remote control via SMS available
- Low power consumption (4 unique states)
- Transmit - < 20W
- Narrow Beam w/o transmit – ~4W
- Idle (regional beam)- < 1W
- Off (wake on packet) - < 50mW
- Friendly for solar and battery compatibility
- Basic installation, no PC required
- Outdoor Unit (ODU) can be pole mounted
- Indoor Unit (IDU) is housed with the remote terminal unit (RTU) or controller
- Relay Mode
- Dedicated M2M webUI
- Remote Management
- Security Enhancements
- Low Power consumption
- Interfaces :
- Ethernet connection (RJ45)
- USB 1.1 connection (USB Type-B) for PC to configure terminal
- RF connector on IDU and external antenna
- Integrated GPS receiver and antenna
- RS232 serial interface (DB9) to external NMEA 0183 based GNSS device (e.g., GLONASS receiver)
- 3 LED status display and a single function button
- 3.5 mm audio jack for audio tone or voltage level to assist in antenna pointing
- USIM card slot behind SIM door
- Terminal Certifications: